Lex Cummings

We had our 2007 Holden VE Commodore fitted with a Kelford Cams in 2014, cam SS108-J and valve spring package. The car was ok before hand but wow what a difference that camshaft made the car has an awesome lumpy idle, goes like a cut cat pulling hard from down low and gets positive comments wherever it goes. My wife Violet loves the car and essentially claimed it as her own this left me with no other option but to buy a second LS powered Holden V8 this time a 2008 ute there was no question about what would be done. After seeking a bit of advice from James at Kelford Cams it was fitted with a HS108-C12 and matching valve springs. Once again wow fantastic result. We absolutely love our Holdens and of all the modifications we have made the Kelford cams have had the best result. I have no hesitation in recommending Kelford Cams.


Ivan -Australia

My project car is a street driven blown 1UZFE powered 300ZX. Like many projects they often take years to come together. I purchased a set of CROW cams a few years ago and had no end of problems getting them to work, wouldn't make good power, had poor cranking compression and driveability was shocking. After 2 years of looking for other problems that just were not there I bit the wallet and fitted a set of Kelford cams. And Wow what a difference, more torque through the rev range and more power top end, great driveability. Engine just wants to run past the rev limit.  Kelford cams made a big improvement to my project and definitely worked for me, they are superior in finish and the staff there go out of their way to help out.


  Dan O'Donnel - Professional Awesome racing - IN, U.S.A

"Just a quick update. We competed at Global Time Attack’s Super Lap Battle, which is the biggest time attack event of the year in the USA and set a new record. Thanks for the support and the cams and valvetrain have been working perfectly as always. We increased our top speed on track 6mph over last year at the same boost levels.

We love Kelford products and have been using them for years. We’ve never had a single issue with them and love making great power!"


Matthew & Michelle - Tasmanian Engine Reconditioning Services - Tasmania, Australia

"Tasmanian Engine Reconditioning Services have been using Kelford Cams since October 2008.  The service is great and there is always a friendly voice on the other end of the phone.  We are in Tasmania and our orders are always delivered in a timely manner.  We have used the following Cams from Kelford: SR20, 3SGTE, 4AG, 4AGT, RB25, RB26, 2JZGTE.  The feedback we get from our customers is fantastic, they are all very pleased with the end results.  The products are excellent, the service is excellent and we will certainly be doing more business with Kelford Cams in the future.

We recently fitted Kelford cams to a GTiR Pulsar with awesome results.  The car has had numerous track days and after the fit the car was 1.5 seconds quicker than the previous time at a local track.  The extra power gained then blew up the gearbox, the customer was completely stoked with this result."


 Adam Courtis - Tuspeed Pty Ltd - Victoria, Australia

"We've been using and selling Kelford camshafts for quite some time now and have found them to be an excellent product range, very easy to setup and very well made. The grinds are well suited to their given applications, and it always impresses me even with the more aggressive cams how well the cars can actually be setup to idle and drive. The team at Kelford are always extremely helpful, quality is always paramount, and the cams work as they're meant to - it makes for a very easy product to retail, recommend and use. (it's what we use in our own cars)"


 Wilfred Chang - JHH Performance Engineering - Victoria, Australia

"We fitted some Kelford L182B camshafts to a Nissan RB25/30 cylinder head along with some port work and solid lifter conversion and the results were amazing.

We saw a 70Kilowatt (94horsepower) gain and all that using 6 pounds less boost. We saw a jump from 432 rear wheel kilowatts to 499 kilowatts.

From that day Kelford Cams is our first choice in Camshafts."


David Localio - Head Games Motorworks - NJ, U.S.A.

"Kelford is the best you're going to get when it comes to power level out of your cams.  We use them in everything now..."


 Tony Negron - The Racing Store - FL, U.S.A

"Your cam numbers were right on the mark! After the initial break in period, we dynoed the car and on the first pass it went 5 lbs overboost and it made 840 HP, 110 HP more than before. We lower the boost to 38lbs,the same setting as before and it gave us 785hp, a full 80hp more just from the cams. I could not believe it."


Reginaldo - SubZero Motors - Dubai, United Arab Emirates

"Since the beginning of 2009, we have been using Kelford Cams' products  in our shop and in our Performance Garage in Dubai.
We and our customers are satisfied with the superior quality and performance of the products. The pricings are attractive and affordable at such qualities.
Thanks to Kelford Cams for such service and products. "


Import Tuner Magazine Article

 Article Excerpt: The Kelford Stage 1 cams might be advertised as a mild cam, but deliver like a race cam, offering good response and lots of power through the entire rpm range. Asking Erick his impressions of the cams, he had this to offer: "Factory cams begin to lose power after 7,800 rpm but these cams want to make more power, even past our final 8,698rpm run. I wouldn't be surprised if they made more power past 9,000rpm."

You can read the entire article here


Ben Gibson -NSW, Australia

 "Thanks for letting me know how my order is progressing. I'm pushing some pretty tight timeframes and it makes the world of difference when suppliers pass on info like this. I've dealt with you guys before and I'm again impressed with your fantastic customer service. I will be sure to pass on my good experiences with the rest of the club."


Ben Oswald - AB, Canada

"Dear Kelford cams,
My cams arrived safely and in a very timely manner in Calgary, AB canada today!!
Thanks again for the superb service! :)"


Jason King - Tasmania, Australia
"Cams turned up yesterday, great service, good shipping time. I'm over the moon..."


Vianney Muzo - Curacao, Netherlands Antilles

"It is a pleasure to do business this way. Very quick response you guys are very professional. Once again thanks."